Tripod Adapter
|
|
BA 168 – Binocular tripod adapter $9.99 Vanguard BA 168 – Binocular tripod adapter |
|
|
TA-N100 Tripod Adapter $36.95 The TA-N100 Tripod Adapter is an attachment for use with the Nikon 1 J1 or V1 digital cameras when a larger lens is attached to the camera and a tripod is being used, so the lens does not come into contact with the tripod head. |
|
|
1/4 inch Tripod Screw to Tripod Screw Adapter for Flash $3 1/4" Tripod screw to Tripod screw Adapter for flashThis adapter can connect Tripod screw to 1/4" Tripod screw, this adapter have two nutsMaterial: Anodized Aluminum MetalSize: 100*65*25 mm |
|
|
1/4 inch Tripod screw to Tripod screw Adapter for Flash $1.59 SpecificationThis adapter can connect Tripod screw to 1/4″ Tripod screw, this adapter have two nutMaterial: Anodized Aluminum MetalPackage Included: 1/4″ Tripod screw to Tripod screw Adapter x1 |
|
|
Emoblitz 1/4 inch Tripod screw to Tripod screw Adapter for Flash $1.59 SpecificationThis adapter can connect Tripod screw to 1/4″ Tripod screw, this adapter have two nutMaterial: Anodized Aluminum MetalPackage Included: 1/4″ Tripod screw to Tripod screw Adapter x1 |
|
|
Lockdown Magnetic Barrel Rest $9.99 Magnetic Barrel Rest – Manufacture ID: 222-177Accessing a gun deep in the back of a vault can be challenging. Rather than juggling an armful of long guns deploy the Lockdown Magnetic Barrel Rest. It conveniently secures to the outside of any vault and provides a perfect staging location. Overmolded contact points protect your gun’s finish.- Serves as an extra hand when moving guns in and out of va… |
|
|
Kikkerland UL01 Electro Man 4-Plug Multi-Outlet $7.49 Meet Electro Man. So cool, you’ll wonder what you ever did without him. Ready to lend a helping hand (or leg !) depending on your mood. Plug in up to four different items at a time; don’t worry, he can handle it.. with a smile on his face ! Maximum 15 Amps. Maximum 120 Volts. Maximum 1800 Watts Plug into any safe, grounded outlet and he’s ready to go All four plugs are grounded Green light indicat… |
|
|
Eton American Red Cross Road Torq ARCPT100W Self-Powered Spotlight and Emergency Beacon $19.99 Breaking down on the side of the road is bad enough theres also the danger that passing cars wont see you unless you have the Road Torq. With a flashing beacon and spotlight, the Road Torq makes it easy to be seen while you wait for help. Fold-out tripod legs have built-in reflectors for added visibility. The Road Torq has been built to American Red Cross specifications…. |
|
|
Nikon D70 / 705 Pro Battery Grip $99.99 The Merkury Innovations BG-N70 Battery Grip Provides Nikon D70 & D70S Owners With Vertical Shutter Release Button. This Option Makes Shooting With The Camera In Vertical Position Just As Comfortable As Shooting Horizontally. The Merkury BG-N70 Battery Grip Includes An AA Adapter Magazine That Allows You Place 6 AA Batteries For Extended Shooting Time It Also Holds 2 Nikon EN-EL3 Or EN-EL3A OEM … |
Enhance the Quality of Your Wedding Video: Plug Into A Sound System
If you would like to add a professional touch to your "do-it-yourself" wedding video, then plug into a sound system. These days, many churches have a sound system for the listening convenience of the congregation. Having your wedding ceremony picked up by an audio feed to the camera will really enhance the overall quality of your wedding video.
If there is a sound system in the church ask the audio control operator to give you an audio feed to one of your cameras. This means running an audio cable from the sound system into the mic input jack on your camera. Check the quality of the audio feed by powering-up the camera and listening through your headset which should also be plugged into the camera.
The main audio control board of the system usually has either a 1/4" or 1/2" jack marked "Line Level" or "Mic Level" output. Plug one end of your audio cable into the Mic Level output and the other end into your camera. Ask the audio operator if he has an extra microphone cable that you can use. If not, you can rent one or you can inexpensively purchase one at your local Radio Shack. Just make sure its long enough for your purposes.
Another piece of optional audio equipment you may want to rent or buy is a hand-held microphone. This microphone plugs into your camera through the external mic input jack and allows you to capture better audio and gives you better range. You can also check the quality of this audio by having someone speak into the microphone while you listen through the headset.
This is a pre-production task you might want to take care of at least a week before the wedding. You will then have sufficient time to acquire an audio cable. You don't want to be scrambling to get what you need the morning of the wedding.
If the church doesn't have a sound system and the budget allows it, you can also rent a wireless lavaliere mic that the minister will clip to his clothes, and a receiver you will plug into the external mic input jack on the camera. You can tape the receiver unit to one of the legs of the camera tripod with duct tape. Just be sure to become familiar with the operation of the lavaliere mic and make sure it has fully-charged batteries.
Without an external microphone you will have to rely on the camera microphone which means you have to move in closer to your subject. This shouldn't be a problem because most camera mics are very sensitive. Just make sure you are close enough to your subject by listening through your headset.
Add that professional touch to your wedding video by making sure the audio is the best it can be.Olivia Romero is an independent video producer with over 15 years experience as a writer, producer, director and editor. Olivia teaches couples how to save money by producing their own professional-looking wedding video. Its easy and fun! To learn more, visitWedding Video Secrets.
Article Source: http://www.simplysearch4it.com/article/50849.html
|
|
1/4 Inch to 3/8 Inch Convert Screw Adapter for Tripod Holder (Silver) $1.99 This silver convert screw adapter, made from high-purity aluminum alloy, is durable and will not rust. It is used to convert 1/4 inch screw to 3/8 inch screw and 3/8 inch screw to 1/4 inch screw as well. |
|
|
1/4" and 3/8" Dual-head Female Threaded Screw Adapter for Flash Lamp $2.99 The screw adapter is made from high purity aluminium alloy which is durable and will not rust. It has standard screw hole, which supports various screws. By using which, you can fix your flash lamp panel on the tripod. |